दोस्तों आज हम गूगल का शॉर्टकट तरीके से प्रयोग करना सीखेेंगे।
गूगल पर किसी भी गाने के बोल खोजने के लिए सबसे पहले गाने का नाम टाइप करें। फिर स्पेस देकर : lyrics लिखें।
आपको सीधे टेक्स्ट रिजल्ट्स प्राप्त होंगे।
अगली पोस्ट में और शॉर्टकट के बारे में जानकारी उपलब्ध होगी
धन्यवाद
Rooting is a process that allows you to attain root access to the Android operating system code (the equivalent term for Apple devices id jailbreaking). It gives you privileges to modify the software code on the device or install other software that the manufacturer wouldn't normally allow you to.
Kingo Android Root offers every Android user the easiest one-click method to root any Android devices. How to use this universal Android root software to root your Android device? Here we go.
Make sure you get everything right beforehand.
Article Taken from : http://www.kingoapp.com
Kingo Android Root offers every Android user the easiest one-click method to root any Android devices. How to use this universal Android root software to root your Android device? Here we go.
Make sure you get everything right beforehand.
- Device powered ON
- At least 50% battery level
- Internet connection necessary
- USB Cable (the original one recommended)
Step 1: Free download and install Kingo Android Root.
Kingo offers the best one-click Android root software for free. Just download and install it now.Step 2: Double click the desktop icon of Kingo Android Root and launch it.
After launching Kingo Android Root, you will see its interface as shown below.Step 3: Plug your Android device into your computer via USB cable.
If your device driver is not installed on your Computer, Kingo will install it for you automatically. Make sure you get Internet conenction so that device driver can be downloaded. If you are using Windows 8, you may need to change some settings first. When running Kingo Android Root on Windows 8, the issue you may most likely encounter is driver installation looping.How to solve driver installation looping on Windows 8 when running Kingo Android Root?
Step 4: Enable USB Debugging mode on your Android device.
USB Debugging mode enabled is a necessary step of Android rooting process.What is USB Debugging Mode?
USB Debugging Mode is one thing that you cannot skip to know if you are an Android user. The primary function of this mode is to facilitate a connection between an Android device and a computer with Android SDK (Software Development Kit). So it can be enabled in Android after connecting the device directly to a computer via USB.
USB Debugging Mode, in some versions of Android, is also called Developer Mode. Then it is relatively easy for you to understand that this USB Debugging Mode establishes a direct connection between an Android Device and a computer and readies it for deeper-level actions. You may come across a pop-out notification as it shows below:
What is USB Debugging for?
USB Debugging Mode is definitely important, as you can see. But why? What capabilities that it carries make this mode so important? What is USB Debugging for?
You've probably got the idea that USB Debugging Mode grants you a level of access to your device. What kind of access, you may ask. This level of access that USB Debugging Mode grants is important when you need system-level clearance, such as when coding a new app. This mode, also called Developer Mode, allows newly programmed apps to be copied via USB to the device for testing. Depending on the OS version and installed utilities, the mode must be turned on to let developers read internal logs.
But it does more than that. There are a few non-development-related benefits from this new level of access that can give you much more freedom of control over you device. For example, with Android SDK, you gain direct access to your phone through your computer and that allows you to do things or run terminal commands with ADB. These terminal commands can help you restore a bricked phone. So this mode is a useful tool for any adventurous Android owner.
Of course, the background knowledge is always complicated for those non-experts. This is exactly what Android Update exists for. Android Update incorporated all these complicated features and tools to make it easy for you.
How to enable USB Debugging mode?INPORTANT: Pay attention to your device screen for a prompt window. Tick "Always allow from this computer". If you don't, you will probably get yourself an OFFLINE DEVICE.
Step 5: Read notifications carefully before rooting your device.
Android rooting is nothing big. However, it is not exactly a small issue either. Rooting your device may open a door for you, and yet with risks.Android rooting is a modification process to the original system, in which the limitations are removed and full-access is allowed and thus resulting in the ability to alter or replace system applications and settings, run specialized apps and even facilitate the removal and replacement of the device's operating system with a custom one. Rooting your device will immediately void your warranty...
Step 6: Click "ROOT" to root your device.
Kingo Android Root will employ multiple exploits on your device, which will probably take a couple of minutes. In the rooting process, your device may be rebooted several times. Do not be panic, it is perfectly normal. And once it begins, please DO NOT touch, move, unplug or perform any operation on your device. Step 7: Root succeeded, click "Finish" to reboot your device.
Hopefully your device is well supported and successfully rooted by Kingo. Until your device reboots itself, do not operate.Step 8: Check the root status of your device.
Normally, you will find an app named SuperSU installed on your device after successful rooting. Article Taken from : http://www.kingoapp.com
The ways to enable USB Debugging mode, which is accounted for the key step in Android rooting
process, vary from one Android version to another. USB Debugging is
required by adb, which is used for rooting, backing up, installing a
custom ROM, tacking screenshots from computer and more.
To disable USB Debugging and other developer options when you don't need them, slide the switch at the top of the screen to OFF.
Article Taken from : http://www.kingoapp.com
1. Android 2.0-2.3.x
Settings > Applications > Development > USB Debugging.
2. Android 3.0- 4.1.x
Settings > Developer Options > USB Debugging.
3. Android 4.2.x and higher.
In
Android 4.2 and higher versions, the Developer Options menu and USB
Debugging option have been hidden. In former 4.X versions of Android,
USB Debugging option is under Developer Options menu.
- Click Menu button to enter into App drawer.
- Go to "Settings".
- Scroll down to the bottom and tap "About phone" or "About tablet",
- Scroll down to the bottom of the "About phone" and locate the "Build Number" field.
- Tap the Build number field seven times to enable Developer Options. Tap a few times and you'll see a countdown that reads "You are now 3 steps away from being a developer."
- When you are done, you'll see the message "You are now a developer!".
- Tap the Back button and you'll see the Developer options menu under System on your Settings screen.
- Go to Settings>Developer Options>USB Debugging. Tap the USB Debugging checkbox.
First, you need to enable "Developer Options Menu".
Now, you can enable USB Debugging mode.
4. Android 5.0 Lollipop
To enable USB Debugging on Android 5.0 Lollipop is the same as Android 4.2.x.
- Settings > About Phone > Build number > Tap it 7 times to become developer;
- Settings > Developer Options > USB Debugging.
To disable USB Debugging and other developer options when you don't need them, slide the switch at the top of the screen to OFF.
Article Taken from : http://www.kingoapp.com
Today I am going to show you how to enter in windows computer without knowing the password..
You have a system which have Windows 7 installed. Now you don't know password, and you want to log in.
Just
push your power button directly and open. Until you not get this
screen. you wish to do this process 3 to 4 times. You have to reboot
your system forcefully by using power button.
Just select LAUNCH REPAIR and Press Enter.
Let the repair go through. If you get this window, select “Cancel.”
And Select Repair.
When
you get this window, click on “Show problem details.” Scroll down, and
click the link on the very bottom. Notepad should pop up.
Go to File/Open, and double-click your “Local Disk” (Mine is D:/ because I have a virtual machine. Yours will probably be C:/).
Go
to Windows/System32. Now do EXACTLY as I say, or you MIGHT break the
computer. Under “Files of type,” select “All files.” Scroll down and
find “cmd,” then make a copy of it in the same folder (Ctrl-C, Ctrl-V).
You should get a file named “cmd – Copy” or something like that.
Find “sethc” in the same folder. This file executes sticky keys. Rename it to “sethc 1.”
Go
to Windows/System32. Now do EXACTLY as I say, or you MIGHT break the
computer. Under “Files of type,” select “All files.” Scroll down and
find “cmd,” then make a copy of it
Rename your “cmd – Copy” to “sethc.” Close notepad, and hit “Finish” to shut down your PC, or just restart it manually.
Once
you get back to the login screen (where it says “Press Control – Alt –
Delete.” Ignore my background, I don’t have that enabled), press “Shift”
5 times to open up the command prompt.
Next,
we need to find out what user is the local administrator for this PC.
To do this, type “net localgroup Administrators” and look for any
administrator that does NOT have your school/work domain in front of it,
followed by a “/.” As you can see, one of the admins is named “qwaszx.”
You will probably see a name like this, since schools/workspaces tend
to make it a random string of letters and/or numbers to ward off people
from entering it.
in the same folder (Ctrl-C, Ctrl-V). You should get a file named “cmd – Copy” or something like that.
Now,
we need to change that account’s password. Type “net user <ACCOUNT
NAME HERE> *” and type the new password twice. It will not show what
you’re typing, but your keystrokes are being registered. You can now log
in to your admin account! However, schools/workspaces also like to
disable the admin account you just changed the password for, so you
might not be able to log in. There is a simple fix. If you get that
message, go to the extra step below.
If the admin account is disabled, type “net user <ACCOUNT NAME HERE> /active:yes” You will now be able to log in.
You
now have full admin rights to the PC. Enjoy! AGAIN, I AM NOT
RESPONSIBLE FOR ANY MISTAKES OR DAMAGES TO THE COMPUTER OR NETWORK. DO
AT YOUR OWN RISK!
Thanks
Subscribe to:
Posts (Atom)